Grindmaster TEA-300 User Manual

1103 Form # AM-325-04Part # A090-103American Metal Ware® Tea BrewersOperation and Instruction ManualforTEA-300Tea Brewer SeriesGrindmaster Corporation

American Metal Ware®Tea Brewers Page 9TROUBLESHOOTING GUIDEProblem/CauseRemedyWeak tea• Not enough tea used• Water not hot enough• Water not hot enoug

American Metal Ware®Tea Brewers Page 10Problem/CauseRemedyOverfilling of water tank when power is off• Fill valve not sealing properly• Disassemble, c

American Metal Ware®Tea Brewers Page 11Tea-300 Isometric

American Metal Ware®Tea Brewers Page 12Tea-300 3-Gallon Dispenser Isometric

American Metal Ware®Tea Brewers Page 13Tea-300 Wiring Schematic

American Metal Ware®Tea Brewers Page 2Warning LabelsThe following warning and caution statements are contained in different sections of this manual.Pl

Set-Up / Position1. Position the brewer on a strong, stable counter top or table.2. Check the level front to back and side to side. Adjust the le

Electrical Requirements (cont.)3. The body of the brewer must be grounded. A ground lug is provided for this purpose.Initial Start-Up1. Turn on t

American Metal Ware®Tea Brewers Page 5Operation1. Place an empty tea dispenser on the base of the tea brewer. The placement should allow the bypass

American Metal Ware®Tea Brewers Page 6Timer Adjustment (cont.)3. This timer is adjustable from 15 seconds to 8 minutes.4. Make the desired adjustm

Cleaning Procedures (cont.)Daily CleaningCabinet: The outside of the machine can be cleaned with a damp cloth, a household dusting spray or a stainles

To Remove the Water Tank Heating Element1. Disconnect the power cord and remove the top cover.2. Disconnect the wire leads to the heater and therm